WHAT WE’RE PRODUCTS
Sub Products
Product Details
FIRE RAY 5000 MOTORISED REFLACTIVE AUTO ALIGNING BEAM SMOKE DETECTOR
The Fireray® 5000 motorised reflective, auto aligning infrared optical beam smoke detector can be installed with up to two detector heads per system, thus saving on installation time and costs. In addition, each system controller houses two pairs of fire and fault relays, one per detector. This innovative system has been designed from the ground up to include pioneering technology that fully addresses the needs of the installer and user, both now and in the future.
Product Description
• Up to 2 Detector Heads reporting to One Ground Level Controller
• Range of 26.2 ft to 328 ft (8 m to 100 m)
• Long range prism kit extends range from 160ft (50m)
to 330ft (100m)
• Built in Laser assisted prism mounting
• Auto-Alignment 2 to 4 minutes per head
• AutOptimise: Auto-Correction due to building shift
•
• Contamination compensation
• Separate Trouble and Alarm relays for each of the 2 channels
• Password protected settings
• Low current draw 5 to 8.5mA
• Built-in 1/2”/M-20 conduit knock-outs on the system controller
• Programmable alarm thresholds: 10% – 60% in 1% increments
• Programmable Fault and Alarm delay: 2-30 Seconds
Housing: Flame Retardant PC UL94 V0
IP Rating: IP54
Finish: Light Grey/Black
Weight: Head & Controller 3.24 lbs (1.47 kg)
Dimensions: Head: 5.28” H x 5.16” L x 5.28” W
(134mm H x 131mm L x 134mm W)
Controller: 3.43” H x 9.06” L x 7.95” W
(87mm H x 230mm L x 202mm W)
Prism: 0.37” H x 4.13” L x 3.94” W
(9.5mm H x 105mm L x 100mm W)
Primary Input Power: 14 to 36 VDC
Standby Current: Low Current Mode: 5mA to 8.5mA @
24VDC depending on number of detector
heads used
High Current Mode: 37mA @ 24VDC
Alarm Current: – 5mA to 8.5mA @ 24VDC depending on
number of detector heads used
Relay Contacts: 1A @ 30VDC Resistive
Reset Time: 5 Seconds maximum
Start Up Time: 45 Seconds
Optical Wavelength: 850nm
Alarm Threshold: 10% – 60% (35% Default)
Temperature Rating: -4°F to 131°F (-20°C to 55°C)
For UL Listed Installations: 32°F to 100°F
(0°C to 38°C)
Relative Humidity: 0% to 93% RH non-condensing
Range: 26.2 ft to 328 ft (8 m to 100 m)
Cabling Between each
Detector & Controller: 18-14 AWG 1-Pair
