Sub Products

Micro-controller based
12 wired zones
Inbuilt GSM based speech and SMS dialer module
Separate remote key pad with 16×4 LCD display and 16 key back lit key pad
Can attach up to 3 additional LCD display remote key pads
Android app to operate and program panel
1 admin code and 3 user codes
Auto reset after activation
3 sub partitions with programmable schedule
Scheduled partitions and zones
Automatic arming or disarming, optional and programmable
One day holiday programmable for automatic disarming feature
GSM dialer module supports 2 speech / voice messages
Separate intrusion message
Separate fire message
10 telephone numbers for intrusion message
10 telephone numbers for fire message
20 second recording time for each message
Multiple Alarm and Status SMS
Alarm SMS with alarm type, zone number, time and date information
Alarm SMS types – intrusion alarm, panic alarm, fire alarm, tamper and wrong code
Status SMS sent to admin user on first number – system arm, admin disarm, user disarm, system on, AC power on, AC power
off, low battery, admin or user code change, telephone numbers added, telephone numbers deleted, daily health status.
Daily System On health status SMS sent once a day to admin user on first number
Power status SMS for AC power on/off, low battery
User editable name and address for alarm SMS
Message playback
Android App is SMS based, no internet required for daily use
All key panel functions and features programmable from app
All alarm alerts and status events received, displayed and logged in the app
Panel can also be operated through mobile via simple SMS commands
Automatic temporary bypass of open 24 hour zones in case of open zone
Detectors connected to fire zones are automatically reset after one hour in case of an alarm
Built in provision for 12V 7AH SMF battery
Zone omitting facility
Silent arming
Night mode arming
Intrusion log with time and date
500 Event log for alarms and menu access
Open and close information for alarm zones
Dedicated panic, fire and quick arm keys
Silent dialing
Power failure indication
Battery strength display on LCD display
Blown fuse indication on LCD display
Last open zone status is indicated on LCD display
GSM signal strength display
3 status LED – Mains, SMS/Dialing & ARM
Automatic re-arming after an intrusion
System goes into alarm state after three incorrect code attempts
Previous state (armed or disarmed) retained when panel is re-powered
Independent entry delay time 2 to 255 seconds
Independent exit delay time 2 to 255 seconds
Sounder time 2 to 20 minutes
Non-volatile memory
Inbuilt SMPS with short circuit, over load and thermal shut down protection
Inbuilt tamper switch and vibration detector for advanced tamper detection
Remote key pad housed in sleek white ABS body with key pad cover
Main control station panel in ABS body

ELECTRICAL
REMOTE KEY PAD ONLY
Quiescent current : 30 mA Max.
Quiescent current with backlit LCD : 90 mA Max.

MAIN CONTROL STATION WITH ONE REMOTE KEY PAD
Quiescent current : 100 mA
Quiescent current with backlit LCD : 360 mA
Current with dialing : 530 mA Max.
Maximum sounder 1 current output : 1 A
Maximum sounder 2 current output : 1 A
Remote key pads : Up to three
Non-volatile Memory : Programming and Log
Zone response time : <500ms
Zone Loop Resistance : <5k ohm for NORMALLY CLOSED

POWER SUPPLY
Mains supply Voltage : 220+10%-15% 50Hz
Total current Output : 4A at 220V AC
Battery Voltage : 12V DC
Battery type : SMF Rechargeable
Battery Recharge Voltage : 13.8V +/-0.2V DC

ENVIRONMENTAL
Operating Temperature : 0C to 45C
Storage Temperature : -20C to 60C

PHYSICAL
REMOTE KEY PAD
Dimensions: 150mm x 121mm x 33mm

MAIN CONTROL STATION
Dimensions: 258mm x 230mm x 76mm
Max Battery Dimensions: 150mm x 110mm x 64mm
GSM Frequency : Dual Band 900MHz / 1800 MHZ